Skip to main content
Skip table of contents

Storing components

Crush hazard from falling loadsThe controller and the shelf are too large and heavy to be handled by a single person. There is a crush hazard to extremities if you drop the controller or the shelf. Always handle the controller and the shelf with two people.

Risk of injury due to electrostatic dischargeThe device may develop electrostatic charges during operation, which can cause mild electric shocks upon contact. Always use an anti-static wrist strap with grounding connection or an anti-static mat with grounding cable when working on the Silent Brick Library.

Risk of property damage due to improper handlingThe components of the Silent Brick Library may be damaged if handled improperly. Only trained specialized personnel may handle the components of the Silent Brick Library.

  • The storage location must meet the following requirements:

  • The storage location must be dry and covered.

  • The storage location must be protected from drafts.

  • The storage location must be dust-free.

  • Protection from light with a high UV content (e.g., sunlight, fluorescent tubes), as plastic parts can become brittle due to UV exposure.

  • The optimal air temperature at the storage location is between +15°C and +25°C.

  • The air temperature at the storage location should not exceed 38°C.

  • The humidity at the storage location should not exceed 65 %.

  • ➤ Never store the device near heat sources.

  • ➤ To avoid property damage, never stack the components of the device.

  • ➤ Keep the device away from electromagnetic fields.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.