Additional global settings

In the "Miscellaneous" section, you can set the date, time, and automatic log off. The log off ensures that the user is automatically logged out if they have been inactive for a specified period.

Set date and time

Changing the time zone has profound effects on operation. A reboot is strongly recommended after a change.

To set the date and time, proceed as follows:

➤ Click the 'Edit' button in the 'Date & Time' section.
➤ The 'Date & Time' window will open.

➤ Enter an IP address for NTP Server 1.
➤ Enter an IP address for NTP Server 2.
➤ Select a time zone.
➤ The current date and time will be displayed automatically.
➤ To confirm your entries, click the ‘Save’ button.
➤ To cancel your entries, click the 'Cancel' button.

Set Log Off

To set the automatic Log Off, proceed as follows:

➤ Click the 'Edit' button in the 'User Interface Auto Log Off After No Activity' section.
➤ The window 'User Interface Auto Log Off Timeout' opens.

➤ Select a period after which the user will be automatically logged off.
➤ To confirm your input, click on the button "Save".
➤ To cancel your input, click the 'Cancel' button.

Set temperature unit

To set the unit for displaying the temperature, proceed as follows:

➤ Click the 'Edit' button in the 'Temperature Unit' section.
➤ The 'Temperature Unit' window opens.

➤ Choose between Celsius and Fahrenheit.

Set standard slot of the tape library

When adding additional bricks to an existing virtual tape library, they are by default placed directly in a free slot. An attached software recognizes this via a tape import run.

By changing this setting, new tapes are added to the virtual tape library through the virtual I/O slot and can be added and correctly placed in the attached software via its import function.

➤ Click the button 'Edit' in the section 'Default Slot for New Library Bricks'.
➤ The window 'Default Slot for New Library Bricks' opens.

➤ Choose between I/O Slot and Storage Slot.

Set up automatic Secure NAS import

To activate the automatic import of newly inserted Secure NAS Bricks, proceed as follows:

➤ Click the button 'Edit' in the section 'Handling of New Inserted Volume Bricks'.
➤ The window 'Handling of New Inserted Volume Bricks' opens.

➤ Check the option 'Import Volumes Automatically'.
➤ To confirm your input, click on the button "Save".
➤ To cancel your input, click the 'Cancel' button.

Edit size of index partitions

Adjusting this value is expressly recommended only after consultation with the support of FAST LTA GmbH.

Under the point 'Index Partition Size Defaults', the default values for the size of the index partitions in the area of the WORM archive, as well as in the area of the Secure NAS ERC, can be edited. These values refer to future SNAS ERC volumes and archives, as well as to Silent Bricks that will be added to existing SNAS ERC volumes or archives.

Set System ID

The System ID is an internal identifier that you receive with your maintenance contract from FAST LTA.

During login, the system continuously asks for this ID as long as no ID has been entered.

To edit the System ID, proceed as follows:

➤ Click the 'Edit' button in the 'System ID' area.
➤ The 'System ID' window will open.

➤ Enter the correct System ID.