Silent Brick System
Silent Brick System
Breadcrumbs

Install Silent Brick Controller G-Series

Install rack rails

Disassemble rack rails

The rack rails must first be disassembled into two parts. To do this, proceed as follows:

  • ➤ Pull the inner rail out of the outer rail until the release lever (32) is visible.

hQQEDjEmLiqopTFF.large

Fig.: Pulling out inner rack rails

  • ➤ Operate the release lever (32).

  • ➤ Pull the inner rail completely out of the outer rail.

1RvOo2v1wOLZYRDP.large

Fig.: Release lever

Mount inner rack rails to the controller/shelf

To mount the inner rack rails to the controller/shelf, proceed as follows:

  • ➤ Position the inner rack rail onto the side housing of the controller/shelf so that the locking pins of the controller/shelf fit into the locking eyes of the rail.

  • ➤ Push the rail forward until it clicks into place.

5SiYlXjuIDAjP6Xh.large
Fig.: Locking rack rails


  • ➤ Secure the rails on both sides with one of the included M4×4 screws to the housing.

6Rr4tCXCymAFPdFe.large
Fig. Screwing in rack rails


Mounting outer rack rails in the rack

  • ➤ To mount the outer rack rails in the rack, proceed as follows:

  • ➤ Slide the safety mechanism (33) of the rail back.

  • ➤ Hook the rail into the rack.

aHIoJXcVEHRNvWAI.large
Fig.: Safety mechanism


  • ➤ Release the safety mechanism.

  • ➤ Ensure that the rectangular locking pins are correctly anchored in the rack holes.

FkKgIkmRGlr2ZTcB.full
Fig.: Locking pin


  • ➤ Screw the rack rail to the front side of the rack with the locking pin.

6wksItQcnUsoYIGG.full
Fig.: Locking pin


  • ➤ Screw the rack rail to the back side of the rack with the locking screw.

vSGxUCjohOIyyirx.full
Fig.: Locking screw


Insert controller/shelf into rack

To insert a controller/a shelf into a rack, proceed as follows:

  • ➤ Pull the outer rack rails as far out of the rack as possible.

ugALcQyQbcOYiiJe.large
Fig.: Pulling out rack rails


  • ➤ Hang the device in such a way that the inner rack rails slide into the outer rack rails.

  • ➤ Slide the device into the rack until it stops.

6MsaHJEsva5hCo6K.large
Fig.: Inserting the device


  • ➤ Operate the release lever.

jHLoYxR4VydXAXVI.large
Fig. Release lever


  • ➤ Slide the device into the rack until the locking mechanism engages.

xJUITpAqHLoXKi3H.large

Fig.: Locking mechanism