To log in to the Silent Brick System, proceed as follows:
-
➤ Read the IP address from the ePaper Display of the controller.
-
➤ Connect a monitor to the Silent Brick Controller.
-
➤ Read the IP address from the monitor.
-
➤ Open the configuration interface by entering the following in the address bar of your web browser: "https://<IP address>"
-
➤ If the device does not detect a DHCP server on the management port during startup, it will fall back to a fallback IP address and display this on the ePaper Display of the controller.
-
➤ For the initial login, use the following credentials:
-
➤ Username:admin
-
➤ Password:adminadmin
-
-
➤ Configure the device.
-
➤ Information on this can be found in the chapter 'Configuring the Silent Brick System'.