To log in to the Silent Brick System, proceed as follows:
-
➤ Read the IP address on the controller’s ePaper Display.
-
➤ Connect a monitor to the Silent Brick Controller.
-
➤ Read the IP address on the monitor.
-
➤ Open the configuration interface by entering the following in the address bar of your web browser: “https://<IP-Address>"
-
➤ If the device does not detect a DHCP server on the management port during startup, it will switch to a fallback IP address and display it on the controller’s ePaper Display.
-
➤ Use the following credentials for the initial login:
-
➤ Username: admin
-
➤ Password: adminadmin
-
-
➤ Configure the device.
-
➤ Information on this can be found in the chapter “Configuring the Silent Brick System.”